Parks Medical Electronics, Inc.
   
 

NOTICE - PARKS EQUIPMENT IS CLASS II - NON-INVASIVE. Click Here

 

MAINTENANCE
VIP Software

DOWNLOAD THE VIP SOFTWARE:

There are two different version of VIP you can download - 6.7 or 6.8.  Which one you use depends on your system configuration.

Download VIP 6.7 if your computer is running Windows 98 or older, and you don't need the HIPAA password-protected login screens.

VIP 6.8 adds support for Windows XP for the main program and adds HIPAA password-protection screens.  A login code is required at installation from Parks to use the software.  Note that the MPI (multi-port inflator) will NOT work in Windows XP with VIP 6.8.

If there are any questions, please call Technical Support at 888-FLOWLAB.

VIP 6.8 UPGRADE ONLY
VIP 6.8 FULL INSTALL OR UPGRADE for floppy diskette installation
VIP 6.7 FULL INSTALL OR UPGRADE for floppy diskette installation
VIP 6.7 FULL INSTALL for CD-ROM or manual installation

 

NOTE: Remember that if you are installing VIP version 6.8, you will need a special access key generated to be able to use it.  You will need to call Technical Support at 888-FLOWLAB to obtain this key.

Please click here for HIPAA configuration instructions.



INSTRUCTIONS FOR VIP 6.8 UPGRADE ONLY:

  • Download VIP_68u.exe and save it to a temporary location on your computer where you will find it again
  • Insert a blank floppy diskette into drive A:
  • Run VIP_68u.exe (Windows self-extracting archive)
  • Make sure the Destination Folder is set to A:\ then click Install - this will extract the necessary files
  • Label this disk as VIP 6.8 Upgrade
  • Take the floppy diskette to your Flo-Lab
  • Run INSTALL.BAT from the floppy diskette
  • After the upgrade is complete, you're ready for the HIPAA configuration instructions

 

INSTRUCTIONS FOR VIP 6.8 FULL INSTALL OR UPGRADE:

  • Download vip_68_full.exe and save it to a temporary location on your computer where you will find it again
  • Insert a blank floppy diskette into drive A:
  • Run vip_68_full.exe (Windows self-extracting archive)
  • Make sure the Destination Folder is set to A:\ then click Install - this will extract the necessary files
  • Label this disk as VIP 6.8 Full Install
  • Take the floppy diskette to your Flo-Lab
  • Run SETUP.BAT if this is a new installation or INSTALL.BAT if this is an upgrade from a previous version
  • After the upgrade is complete, you're ready for the HIPAA configuration instructions

 

INSTRUCTIONS FOR VIP 6.7 FULL INSTALL OR UPGRADE:

  • Download vip6_7.exe and save it to a temporary location on your computer where you will find it again
  • Insert a blank floppy diskette into drive A:
  • Run vip6_7.exe (Windows self-extracting archive)
  • Make sure the Destination Folder is set to A:\ then click Install - this will extract the necessary files
  • Label this disk as VIP 6.7 Full Install
  • Take the floppy diskette to your Flo-Lab
  • Run SETUP.BAT if this is a new installation or INSTALL.BAT if this is an upgrade from a previous version

 

INSTRUCTIONS FOR VIP 6.7 FULL INSTALL FOR CD-ROM OR MANUAL INSTALLATION:

  • Download VIP_67_CD.exe and save it to a temporary location on your computer where you will find it again
  • Insert a blank CD-ROM or ZIP disk into your computer; Extract VIP_67_CD.exe to that disk
  • Label this disk as VIP 6.7 Full Install
  • Take the disk to your Flo-Lab
  • Copy the files and folders from the disk into C:\ on your Flo-Lab; Overwrite any existing files - As long as you keep the existing directory structure from the CD, VIP will be installed

 

If you run into any problems or something unexpected happens, please feel free to give us a call.


Parks Medical Electronics
 
Copyright 1961 - 2013 Parks Medical Electronics, Inc.  All rights reserved.