|
INFORMATION
Part numbers for FLO-LAB and MINI-LAB replacement parts
FLO-LAB 2100
| Description |
Part Number |
Price $ US |
| Operator's manual and Biomed manual (both) |
050-2100-00 |
25.00 |
| 18-BR wireless remote upgrade set (transmitter, charger, charger power supply, and velcro) |
2100 18-BR upgr |
400.00 |
| 18-BR 2100 remote transmitter (rechargeable) |
300-0302-00 |
260.00 |
| 2100 remote charger base |
300-0314-00 |
140.00 |
| Wireless remote receiver for 18-B |
300-0277-00 |
170.00 |
| HP Deskjet D4160 color printer for FLO-LAB (USB only) |
333-0020-28 |
100.00 |
| Model 80 Calibration Fixture / 2100 |
80-2100 |
250.00 |
| 1000 CC Air Chamber, complete |
986-3003-25 |
80.00
|
| 3.9 MHz Pencil Probe, 7' cord |
* ORDER BY |
155.00 |
| 8.3 MHz Pencil Probe, 7' cord |
DESCRIPTION * |
135.00 |
| PPG Probe, 6' 3" |
832-8000-00 |
120.00 |
| 9' hose, Red cuff |
988-1001-30 |
15.00 |
| 9' hose, Yellow cuff |
988-1001-15 |
15.00 |
| 7' hose, Blue cuff |
988-1001-05 |
15.00 |
| MPI Hose Set |
989-4015-00 |
225.00 |
| Keyboard latch, snap-in |
633-1004-00 |
5.00 |
MINI-LAB 3100
| Description |
Part Number |
Price $ US |
| Operator's manual and Biomed manual (both) |
050-3100-00 |
25.00 |
| Corded remote control (Model 4B-SV) |
300-0218-01 |
125.00 |
| Model 80 Calibration Fixture / 3100 |
80-3100 |
250.00 |
| 1000 CC Air Chamber, complete |
986-3003-12 |
45.00 |
| 3.9 MHz Pencil Probe 7' cord |
* ORDER BY |
155.00 |
| 8.1 MHz Pencil Probe 7' cord |
DESCRIPTION * |
135.00 |
| PPG Probe, 6' 3" |
832-8000-00 |
120.00 |
| Shielded PPG Probe 6" (twist on connector) |
832-8001-00 |
235.00 |
| 7' hose, Red cuff |
988-1001-00 |
15.00 |
| 7' hose, Yellow cuff |
988-1001-10 |
15.00 |
| MPI Hose Set |
989-4015-00 |
225.00 |
VASCULAR CUFFS
| Description |
Part Number |
Price $ US |
| HOK 1.6 cm Polyurethane Digit B.P. Cuff |
989-1015-05 |
30.00 |
| HOK 1.9 cm Polyurethane Digit B.P. Cuff |
989-1016-05 |
30.00 |
| HOK 2.5 cm Polyurethane Digit B.P. Cuff |
989-1017-05 |
30.00 |
| HOK 2.5 cm Polyurethane Penile B.P. Cuff |
989-1018-05 |
31.00 |
| HOK 2.5 cm Disposable Penile B.P. Cuff |
989-1028-00 |
4.25 |
| HOK 3.3 cm Polyurethane Penile B.P. Cuff |
989-1019-05 |
32.00 |
| HOK SC 5 Tourniquet Cuff |
989-1020-00 |
27.00 |
| HOK TMC 7 Transmetatarsal Cuff |
989-1021-00 |
23.00 |
| PME 10 cm wide cuff for below knee |
989-1022-10 |
36.00 |
| PME 12 cm wide cuff for above knee |
989-1023-10 |
36.00 |
| PME 12 cm wide extra-long cuff |
989-1023-30 |
40.50 |
| PME Cuff Stiffener |
989-1023-12 |
N/C |
| PME Venous Sensing Cuff (calf cuff for measuring venous outflow time only) |
989-1027-00 |
18.00 |
| PME Venous Sensing Cuff Bladder |
989-1027-01 |
5.00 |
| PME 10 cm Bladder (for PME 10 only) |
989-2000-00 |
5.00 |
| PME 12 cm Bladder (for PME 12 only) |
989-2001-00 |
5.00 |
| 2 cm SoftCheck Cuff |
989-1015-02 |
9.95 |
| 3 cm SoftCheck Cuff |
989-1014-02 |
9.95 |
| 4 cm SoftCheck Cuff |
989-1008-02 |
9.95 |
| 5 cm SoftCheck Cuff |
989-1009-02 |
9.95 |
| 6 cm SoftCheck Cuff |
989-1010-02 |
11.95 |
To order any of the parts listed above, please call 1-800-547-6427 and press 0 on the voice menu.
NOTE: SoftCheck cuffs can be reused but should not be expected to last as long as regular blood pressure cuffs. Most people consider them disposable after a use or two. They have Velcro closures.
RECOMMENDATIONS: Appropriate sized cuffs should be used to obtain blood pressure readings. Using cuffs that are too small gives falsely elevated pressures. Parks recommends the following:
- 12 cm segmental BP cuffs should be used for arms, legs, and ankles.
- 10 cm segmental BP cuffs should be used for wrists and forearms.
- 1.9 cm digit BP cuffs should be used for the second-fifth toes and smaller fingers.
- 2.5 cm penile BP cuffs (an inch longer than digit BP cuffs) should be used for larger toes and fingers.
DISCUSSION: Making true pressure measurements non-invasively depends upon having the proper cuff width with respect to the cross sectional area of the limb. In other words, you wouldn’t use the same cuff on a thin person that you would on an obese one. In diagnosing vascular disease, ratios of pressures at different sites and drops in pressure from one measurement site to the other are our concern more than true pressure values. To get true arterial pressures above the knee you would need much wider cuffs. The problem is that there would only be room for one measurement site. Some 30 years ago it was decided that it was more important to get two measurements above the knee so that a pressure gradient could be detected if there were disease in the femoral artery. Which width you use depends on whose protocol you follow. Generally 12 cm cuffs are used. The old standard for disease was a pressure drop of 30 mm Hg between any two measuring sites, however a drop of 20 mm Hg is now more commonly used.
All values and techniques for diagnosing disease must come from medical literature and medical doctors. Any recommendations we give are solely to help get you started with the right equipment and give you some idea of what to do and what to look for. |
