Parks Medical Electronics, Inc.
   
 

NOTICE - PARKS EQUIPMENT IS CLASS II - NON-INVASIVE. Click Here

 


INFORMATION
Configuring Ethernet connectivity in Windows 98 and XP
AFFECTED MODEL: Flo-Lab 2100


This section details the configuration of your Flo-Lab to connect to your facility's network.  Depending on what operating system you have installed and which version, there are multiple ways to configure your machine.  For your convenience, this will be separated into three sections - choose which one you are running.

These sections assume you are using static IP addresses - if your IP addresses are automatically assigned via DHCP, then this section is unnecessary.  If you do not know your IP address, subnet mask, gateway and DNS addresses, please contact your network administrator.  You must have this information before proceeding any further.

After configuring your network settings, you may go into Sonova and configure your DICOM settings.

Microsft Windows 98
Microsoft Windows XP Classic style
Microsoft Windows XP style

 

MICROSOFT WINDOWS 98 NETWORK CONFIGURATION

 


Right-click on the Network Neighborhood icon from your Windows desktop and left-click on Properties.

 


Locate the line that shows TCP/IP bound to your network adapter, as shown above; Highlight that line and click Properties.
 
Click the IP Address tab.  Click the 'Specify an IP address' radio button.  Type in the IP Address and Subnet Mask that were provided to you from your network administrator.

 

 

Click the Gateway tab.  Type your Gateway address in the box provided and click Add.  That will add it to the Installed Gateways box.
 
Click the DNS Configuration tab.  Click the Enable DNS radio button.  Type in your DNS server(s) in the DNS Server Search Order box and click Add.

You're finished!  Click OK, then OK again.  Windows will install a few files then ask you to Restart - say Yes.

Back to top

 

MICROSOFT WINDOWS XP CLASSIC STYLE NETWORK CONFIGURATION

 


Right-click on the My Network Places icon on your desktop and left-click on Properties.

Right-click on the Local Area Connection icon and left-click on Properties.

 


Highlight Internet Protocol (TCP/IP) and click Properties.

 


Click on the Use the following IP address and Use the following DNS server addresses bullets, then enter the appropriate addresses in the boxes provided.  These addresses are provided by your network administrator.  Click OK out of each box that's open.  You're done!

Back to top

 

MICROSOFT WINDOWS XP NEW STYLE NETWORK CONFIGURATION


Click on the Start menu and select Control Panel.

 


Click the Network and Internet Connections link.

 


Click the Network Connections link.

 


Highlight Internet Protocol (TCP/IP) and click Properties.

 


Click on the Use the following IP address and Use the following DNS server addresses bullets, then enter the appropriate addresses in the boxes provided.  These addresses are provided by your network administrator.  Click OK out of each box that's open.  You're done!

Back to top


Parks Medical Electronics
 
Copyright 1961 - 2013 Parks Medical Electronics, Inc.  All rights reserved.